Insert the new cartridge into the holder and push it down until it clicks into place.Install the new cartridge immediately after removing the old one if you do not, the print head may dry out and be unable to print. Do not touch the green chip on the cartridge. Then remove the cartridge from the package.ĭo not remove any labels or seals, or ink will leak. Gently shake the new cartridge four or five times as shown.Squeeze the tab on the cartridge and lift the cartridge straight up to remove it.Keep ink cartridges out of the reach of children.
If ink gets into your mouth, spit it out and see a doctor right away. If ink gets into your eyes, flush them immediately with water. Warning: If ink gets on your skin, wash it thoroughly with soap and water. Do not take the used cartridge apart or try to refill it. Note: Dispose of used cartridges carefully. Do not lift the scanner unit while the document cover is open. If you are replacing a cartridge before you see a message on the LCD screen, press the home button and select Setup > Maintenance > Ink Cartridge Replacement.ĭo not touch the flat white cable inside the printer.Note which cartridges need to be replaced, then select Proceed and follow the instructions on the screen. If an ink cartridge is expended, you see a message on the LCD screen.Cartridges are vacuum packed to maintain reliability. Do not open ink cartridge packages until you are ready to install the ink. Leave your old cartridges in the printer until you are ready to replace them to prevent the print head nozzles from drying out. You must install new cartridges immediately after removing the old ones. Make sure you have your replacement cartridges handy before you begin.
0 kommentar(er)
